How To Download Checkra1n Linux Jailbreak iOS 14 – iOS 14.2

Are you looking for checkra1n jailbreak on a Linux computer? If yes, then you’re in the right place. Here in this article, I am showing you how you can iOS 14 – iOS 14.2 checkra1n Linux jailbreak in a step by step manner in two ways. You can do it on your Linux computer or by dual booting Linux in your windows computer, both methods are explained below. The checkra1n Linux is released and available on the official checkra1n jailbreak website. It supports iPhone 5s to iPhone X and supports iOS 12 – iOS 14 and up.

The checkra1n jailbreak now officially fully supports A9 – A9X and A10 devices, as well as, partial support for A11 devices by skipping the BRP check.

iOS 14 Checkra1n jailbreak supported devices

The checkra1n jailbreak now officially fully supports A9 – A9X and A10 devices, as well as, partial support for A11 devices by skipping the BRP check.

• iPhone X (Partial Support – skipping A11 BRP check)
• iPhone 8 and iPhone 8 Plus
• iPhone 7 and iPhone 7 Plus
• iPhone 6s, 6s Plus, and SE
• iPad 5th generation
• iPad Air 2
• iPad mini 4
• iPad Pro 1st generation
• Apple TV 4 and 4K
• iBridge T2

How To Checkra1n Linux Jailbreak iOS 14 – iOS 14.2 (Linux Already Installed)

Follow this method if you already have a Linux computer. If you got a MAC computer, here is the complete step by step tutorial to iOS 14 checkra1n jailbreak on a Mac computer.

Step #1

First of all, go to the official checkra1n website and download the checkra1n Linux jailbreak file according to your operating system, you probably need the 2nd download link.

Step #2

Open the downloads folder where this file is downloaded and open the terminal windows because we need to run a few commands to checkra1n Linux jailbreak on a Linux computer.

Step #3

Write this command below on the terminal and then drag and drop the checkra1n jailbreak folder on the terminal and hit enter.

chmod +x (drag and drop the checkra1n folder).

After that, write this command below on the terminal and then drag and drop the checkra1n jailbreak folder on the terminal and hit enter.

Sudo (drag and drop the checkra1n folder).

After you run the above command, the terminal might ask you to put in your computer password if you have any applied. The checkra1n Linux jailbreak will open on your screen.

It doesn’t have the graphical user interface as it’s on Linux, you can navigate on menus with your keyboard’s arrow keys.

checkra1n jailbreak ra1nusb method, no dual boot needed.

Installing Checkra1n on A11 Devices With Skip BRP Check

As checkra1n jailbreak is partially supported on A11 devices, you need to skip the BRP check on your device. Disable the passcode or faceID on your device, as if you want to jailbreak on A11 devices unfortunately for now you can’t have the passcode/faceID on checkra1n jailbroken devices.

Now if you are installing on A11 devices, in the options page, check the Skipping BRP check checkbox first. If you are jailbreaking on lower devices than A11, just leave it as it is already.

Step #4

Press the start button, and press enter. It’d say to put your device into DFU mode here, press enter and put your device into DFU mode when it shows you the instructions or the screen below. Remember to do this after you press enter on the start button. Different methods to put your device into DFU mode are explained below; use the one related to you.

Here is the complete tutorial to checkra1n jailbreak for windows.

DFU Mode iPhone X or iPhone 8 – checkra1n iOS 14 Linux jailbreak: 

1. Press and hold the Side button for almost 6 seconds, and then release it.
2. Now immediately press, and press and hold the volume down button and the side button together for approx 3 seconds.
3. After 3 seconds, wait, release the side button only, keep pressing the volume down button for at least 5-8 seconds.

Unc0ver vs Checkra1n vs Odyssey jailbreak, which one is better for your device?

DFU Mode iPhone 7 or 7 Plus – iOS 14 checkra1n Linux install:

1. Press and hold the side and volume down buttons together for almost 10 seconds.
2. After 3 seconds, wait, release the side button only, keep pressing the volume down button for at least 5-8 seconds.

DFU Mode iPhone 6s, iPad, or iPod touch – Checkra1n Linux jailbreak iOS 14:

1. Press and hold the Side and Home buttons together for approx 10 seconds.
2. After 10 second wait, release the side button only, keep pressing the home button for at least 5-8 seconds.

Your computer screen will show you a progress bar, let the process finish, and you’ll see Checkra1n Linux jailbreak on your mobile’s home screen. Open it and install the Cydia in your device if its the first time you have installed the checkra1n jailbreak.

Here is the massive list of checkra1n jailbreak tweaks, all the repos are provided with tweaks.

How To Checkra1n Linux Jailbreak iOS 14 – iOS 14.2

This method is when you have a windows computer. You need to run Linux via dual booting on your computer. Follow the step by step process below.

Step #1

First of all, you need to download the Ubuntu desktop and download Rufus in your computer. Links are provided, download these two using those official links.

Step #2

Open Rufus using Run As Administrator, Attach an empty flash drive of at least 16 GB of space. In the boot selection option, choose the Disk or ISO Image option. Now hit in Select button and select the Ubuntu ISO image file and start the bootable process.

Here is how to backup all tweaks and restore them later.

Step #3

Now, restart your computer and go into BIOS settings and then in the Boot menu so you can boot your computer through the attached bootable flash drive.

Step #4

In the boot menu, select the attached USB and hit enter. Your computer will be booted in Ubuntu; you’ll see different options, the first one will be Try Ubuntu without Installing, select this one and hit enter, this way you don’t need to install Ubuntu on your computer, only run it to install checkra1n Linux.

Interested in another jailbreak? read about the Odyssey jailbreak.

Step #5

As you see the Ubuntu progress bar and then the desktop, open this checkra1n website through firefox in Ubuntu and download the 2nd file for checkra1n Linux on your computer. Bring the downloaded file on your desktop because we need to run a few commands on the terminal.

Step #6

Open the terminal and put this command below and hit enter.

echo “deb https://assets.checkra.in/debian /” | sudo tee -a /etc/apt/sources.list

Then put this command below and hit enter.

sudo apt-key adv –fetch-keys https://assets.checkra.in/debian/archive.key

After that, run this command below.

sudo apt update

Now run this command first cd Desktop and hit enter, then put this command chmod 777 checkra1n and hit enter, after that put in this command sudo ./checkra1n

As you run the above last command, checkra1n Linux will open on your screen, now attach your device to your computer. If you see a popup requiring you to Trust, do it. From now on, follow the 1st method of checkra1n Linux jailbreak from step 4. Use arrow keys to navigate on the menus.

Here is the huge list of checkra1n jailbreak tweaks, all the repos are provided with tweaks.

Remember that whenever you reboot your device, you need to jailbreak your device as its a semi-tethered jailbreak. This means you need a computer to reactivate jailbreak every time your device is rebooted.